Cls-3900 Car Uart Review
void setup() Serial.begin(9600);
void loop() if (Serial.available()) char c = Serial.read(); // process data cls-3900 car uart
import serial ser = serial.Serial('/dev/ttyS0', 9600, timeout=1) while True: data = ser.readline() print(data.decode().strip()) void setup() Serial
CLS-3900 TX → Arduino RX (pin 0) CLS-3900 RX → Arduino TX (pin 1) GND → GND VCC → 5V (if 5V logic) Use GPIO UART (e.g., /dev/ttyS0 or /dev/ttyAMA0 ): void setup() Serial.begin(9600)
CLS-3900 TX → RPi RX (GPIO 15) CLS-3900 RX → RPi TX (GPIO 14) GND → GND VCC → 3.3V (if supported) Python on Raspberry Pi:
One of the features MobaXterm has which I desperately am looking for in many others is the MultiExec feature. The ability to open multiple sessies en issue a command which is executed on all of them. So far MobaXterm has the most useful implementation of this. However since Moba is quite bloated with features I don’t use and not exactly bugfree, I would consider another client, if only …
SecureCRT has this capability.
Right-click the tab and select “Send Commands to This Group”, then go to “View -> Command Window” which will open an area at the bottom of the screen. Anything typed in command window will go to all of the sessions.
Royal TS also has can execute on multiple connections.
Anyone have a suggestion for something that is cross platform on all three (Win/Mac/Linux)?
I’m currently using a Windows laptop and Apple laptop (work & personal), but I’m considering converting the work laptop to Linux. I currently use RoyalTS, but there’s no Linux version…